Home > Independant Living Solutions > Health Aids

Oregon Scientific Wrist Blood Pressure Monitor - BPW211

Product Code: AMO-0356
£22.00
Earn 22 Points with this purchase

Or Apply for
More Information
WRIST BLOOD PRESSURE MONITOR WITH
60-MEMORY CAPACITY


OREGON SCIENTIFIC WRIST BLOOD PRESSURE MONITOR WITH 60-MEMORY CAPACITY Model no. BPW211

DISPLAYS SYSTOLIC / DIASTOLIC AND MEAN BLOOD PRESSURE / PULSE RATE 60 MEMORIES WITH DATE CODE FOR PREVIOUS MEASUREMENTS SIMPLE AND EASY OPERATION

The Oregon Scientific Wrist Blood Pressure Monitor features accurate Oscillometric Measurement system, easyone-touch measurement, easy to read extra large display, automaticpower off, storage container (also serves as armrest) andinformation error messages (also help users correct operationerrors). It can help you measure and track systolic pressure, Diastolic pressure, Mean arterial pressure, Pulse rate, a Historic record of up to 60 measurements with data and time stamp. Readings taken by the BPW211 are equivalent to those obtained by a trained observer using the cuff and stethoscope auscultation method, within the limits prescribed by "EN1060-3 NON-invasive Sphygmomanometers-Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems." The monitor's accuracy in measuring diastolic pressure was tested using the fifth Korotkoff sound method. It is recommended that you read the user manual thoroughly before using this product. Requires 2 x AAA size 1.5V batteries (included). Before every measurement, the main unit establishes a "zero pressure" equivalent to the air pressure. Then it starts inflating the wrist cuff to 180mmHg or higher until it senses that it has blocked your blood in the artery. After that, the deflation process starts, during which time the main unit detects pressure oscillations generated by beat-to-beat pulsatile, which is used to determine the systolic, mean and diastolic pressure, and also your pulse rate. Any motion during this period will result in an incorrect measurement. After all readings are determined and displayed on LCD, the measurement is finished and the wrist cuff automatically deflates.

Brand New and Boxed. Accurate Oscillometric / non-invasive Measurement system. For Adult use only.
Displays systolic /diastolic and mean blood pressure / pulse rate. Recalls up to 60memories with data and time stamp. Easy one-touch measurement. Easy toread extra large display. Power ON button.
Storage container included whichalso serves as armrest. Information error messages which also helpusers correct operation errors.
LCD Display symbols.
Low battery indicator symbol. Operating temperature: 10 degC to 40 DegC (50 degF to 104 degF).
Storage temperature: -20 degC to 60 degC (-4 degF to 140degF). Humidity range: 10% to 83% relative humidity.
Fits wrists of approximate circumference from 13.5 to 19.5cm (5.3 to 7.7inches). Please note: the edge of the wrist cuff should be positioned about 1cm from the bottom of your palm on your left wrist. (Although the instructions say that this monitor will fit wrists up to 19.5cm we have tried it on several people with wrists more than 20cm and it fits fine). Approximate dimensions (HxWxD): 86 x 78 x 30mm / 3.4 x 3 x 1.2 inches. Approximate weight: 160g (5.5 oz) with batteries. Measuring range: Pressure: 30 - 280 mmHg (4.0 to 37.3 kPa), Pulse: 30 - 200 pulse / min. Accuracy: Pressure: +/- 3mmHg (+/- 0.4 kPa), Pulse: +/- 5%. Power supply: 3V DC, 2 x AAA / LR03 / UM4 size 1.5V batteries (included).
Power save: Auto power off after 1 minute of non-activity. Manufacturers 2 year guarantee.
User manual included which has a useful blood pressure log sheet. This device complies with European regulations based on the Medical Products Code, and bears the CE mark "CE0123".
The device has been quality inspected according to EG guideline 93/42/EWG and tested in compliance to the "EN1060-1 Non-invasive sphygmomanometers - Part 1: General requirements" and "EN1060-3 Non-invasiveSphygmomanometers - Part 3: Supplementary requirements forelectro-mechanical blood pressure measuring systems." The CE mark further indicates that this blood pressure monitor meets the general requirements for electronic products as regards to resistance to electromagnetic interference. Malfunctioning may however occur in the proximity of extremely strong electromagnetic fields. In accordance with the "Ordinance for Operators of Medical Products", a technical inspection must be carried out if this device is used for industrial or commercial purposes.
Customer Reviews

Customer Reviews
Write an online review and share your thoughts with other shoppers!